This 48 cm walnut-finish flush ceiling light pairs a metal ring in a walnut-coloured finish with a dome of resin that has a textured surface. Its warm white light comes from an integrated LED, and it fixes to the ceiling or to the wall. It is a flat, clean fitting for contemporary interiors.

An architectural walnut-finish flush ceiling light with a textured dome

This walnut-finish flush ceiling light plays on the contrast between the crispness of its outline and the softness of its centre. The architectural ring, in precision metal and available in a walnut-coloured or a black finish, draws a clean circle 48 cm across, which structures the ceiling or the wall like a graphic frame. Inside, the diffuser dome in premium resin has a textured surface, a little like crushed ice, and the light passes through the material, breaks up in its relief and spreads with great softness. At only 10 cm high, the walnut-finish flush ceiling light keeps a low profile that does not crowd the room. Under a 2.40 m ceiling that leaves 2.30 m beneath it, well above the usual 2.10 m minimum. This walnut-finish flush ceiling light looks less like a fitting than a piece of interior architecture, with measured proportions: 48 cm wide for 10 cm deep, a taut and elegant ratio. Its flexible format lets it go on the ceiling or on a wall, with integrated electrical wiring. In a lounge this walnut-finish flush ceiling light can act as the central light; in a bedroom or an entrance it suits low furniture and plain walls. The walnut-coloured finish goes with oak, timber floors and warm textiles, while the black version brings a firmer graphic accent that talks to metal joinery or black frames. Whichever you choose, the fitting remains a pared-back design object that shows off the architecture of the room.

LED technology and durability of the walnut-finish flush ceiling light

The performance of this walnut-finish flush ceiling light rests on a high-precision 52 W LED module that is entirely integrated. That power, together with the textured dome, gives a generous light for a living room. The colour temperature of this walnut-finish flush ceiling light is a warm white of 3000K, which creates a welcoming mood and shows off the walnut-coloured finish. The stated life is about 50,000 hours, and the LED is not replaceable, which means the fitting is designed as a whole, with no bulb to change from day to day. This walnut-finish flush ceiling light also carries a bathroom zone rating (certified for humid zones), which widens its use to the bathroom and to covered outdoor spaces such as a sheltered terrace or a gallery. Its overall compliance lists North American, Australian, European and Middle Eastern standards. The integrated wiring makes the installation simpler and keeps the lines clean, with nothing exposed. Finally, the choice between ceiling and wall means the same model can be used in several rooms of the home, for a visual coherence from the entrance to the corridor. This walnut-finish flush ceiling light is for anyone who wants one fitting that adapts to several rooms and several uses, from the lounge to the bathroom.

Fitting a walnut-finish flush ceiling light on the ceiling or the wall

This walnut-finish flush ceiling light has two ways of being installed, and each gives a different result. On the ceiling, the 48 cm disc acts as a central light that lights the room evenly, like a large soft moon. On the wall it becomes a sculptural wall light, for example above a sofa, at the end of a corridor or beside a bed, and the texture of the dome then reads in profile as a relief of material. In a bathroom the zone rating of this walnut-finish flush ceiling light allows you to consider it above a mirror or a bath, following the usual installation rules, and your electrician will know which zones apply. On a covered terrace or a porch it gives a warm light without losing its look of an architectural object. For a harmonious result, match the ring to its surroundings: the walnut-coloured finish for warm rooms, black for more graphic schemes. Think also about the height of the walnut-finish flush ceiling light on a wall: placed at shoulder height or above, the textured dome softens the source. One is often enough, but two lined up can also give structure to a long room. Mounted on a wall it stands 10 cm proud of the plaster, so keep it clear of door swings and bed heads. Because the same 48 cm model works on a wall or a ceiling, an entrance, a landing and a bedroom can share one design.

With its metal ring in walnut-coloured finish, its textured resin dome and its warm white LED, this walnut-finish flush ceiling light brings a soft light and an architectural character. Choose your finish and fit it to the ceiling or the wall.

• Free delivery on all orders, with no minimum spend, anywhere in the UK.
• Preparation: your order is prepared and dispatched within 1 to 3 working days. Orders placed before 7pm, Monday to Friday, are handled the same day.
• Delivery time: 5 to 10 working days after dispatch, so 6 to 13 working days in total.
• Tracking: you will receive a dispatch confirmation email containing your tracking number.

Full details in our delivery policy.

• 14 days to change your mind: you have 14 days from receipt of your parcel to return an item to us, with no need to give a reason.
• Conditions: the item must be new, complete and in its original condition, accompanied by the invoice. Return costs are borne by the customer.
• Refund: it is made to your original payment method, after the item has been received and checked. Allow 7 to 14 days depending on your bank.
• Faulty item: contact us with a photo of the fault and we will offer you an exchange or a refund. All our lights are covered by the two-year legal guarantee of conformity.

For any request, write to us from our contact page. Full details in our returns and refunds policy.