This alabaster flush ceiling light pairs a shade of real alabaster with a brass frame, for a soft light that settles quietly onto the ceiling. It comes in three diameters, 30, 40 and 50 cm, and stands only 5 cm deep. At Alborra it brings natural stone into everyday lighting, with all its singularity.

An alabaster flush ceiling light for a soft, mineral glow

An alabaster flush ceiling light belongs where the light should enfold rather than dazzle. The shade is cut from the solid block of real alabaster: the stone lets the light of the integrated LED pass and spreads it through its veins, which gives the ceiling a tranquil halo that is never flat. At a depth of just 5 cm, the fitting sits almost against the ceiling, which matters a great deal in British homes. Under a 2.40 m ceiling this alabaster flush ceiling light leaves 2.35 m below, far above the 2.10 m minimum, so it suits an entrance, a corridor, a bedroom or a lounge with modest volumes. Its low, circular outline is deliberately plain so that the material does the decorative work. Lit, it shows the inner shades of the stone; unlit, it reads as a mineral disc resting on a brass frame. That double reading, by day and by night, is one of the strengths of a well-chosen alabaster flush ceiling light: it dresses the room without loading it. The brass of this alabaster flush ceiling light brings a gold warmth that talks to the natural tone of the alabaster, and it sits easily with pale timber, matt plaster, linen and sand-coloured ceramics. Because every block is unique, no two shades are identical: veining, tone and translucency change from one piece to the next, so what you receive from this alabaster flush ceiling light is a piece of stone with its own mineral story. In a hallway it reads well from the front door, because the stone gives a glow rather than a point of brightness, and the low profile keeps the ceiling line clean.

The specification of the brass alabaster flush ceiling light

This alabaster flush ceiling light is offered in three sizes, 30, 40 and 50 cm in diameter, all with the same 5 cm depth. The very flat profile lets it go where the ceiling height is limited without crushing the room. The shade is alabaster cut from the solid block, which gives each piece its own thickness and translucency, and the structure is brass, a metal chosen for its warm gold finish. The source of this alabaster flush ceiling light is an integrated LED, so there is no bulb to choose or replace and the whole keeps a clean, continuous line. It runs on AC 110-240V, a wide voltage range that works with ordinary mains supplies. The wiring is integrated, and an electrician is advised for the installation, as for any ceiling connection. The 5 cm depth does not change with the size you take, which simplifies planning around beams, cornices and ceiling roses. This alabaster flush ceiling light is designed for indoor use in a dry atmosphere, so keep it for living rooms, bedrooms, entrances and corridors rather than damp spaces. The nature of the material deserves a reminder: alabaster is a natural stone, and its veins, tone and translucency vary from one example to the next. That is precisely what gives this alabaster flush ceiling light its value, since no piece repeats.

Choosing an alabaster flush ceiling light by room

The choice of diameter depends first on the surface to light and the mood you want. A 30 cm alabaster flush ceiling light suits an entrance, a corridor or a small bedroom, where it acts as a discreet pastille of light. The 40 cm size fits a bedroom or a study, while the 50 cm size has more presence in a lounge or an open kitchen, provided the atmosphere stays dry. Think too about how the alabaster flush ceiling light sits with the rest of the room: brass can be repeated in a handle, a frame or the foot of a lamp, and alabaster carries on in mineral textures such as ceramic or stone. If you fit several lights along a corridor, choose the same diameter: their different veining will create a natural rhythm rather than a mechanical repetition. A pair of 30 cm fittings, one at each end of a short corridor, makes a simple, balanced scheme that needs no other decoration. In every case, have this alabaster flush ceiling light installed by an electrician, so that the integrated wiring is connected properly and the fixing to the ceiling is entirely secure.

With its shade of real alabaster, its brass frame and its integrated LED, this alabaster flush ceiling light gives your ceiling a soft light and a true mineral presence. Choose the diameter that suits your room and let the stone do the rest: every piece is unique.

• Free delivery on all orders, with no minimum spend, anywhere in the UK.
• Preparation: your order is prepared and dispatched within 1 to 3 working days. Orders placed before 7pm, Monday to Friday, are handled the same day.
• Delivery time: 5 to 10 working days after dispatch, so 6 to 13 working days in total.
• Tracking: you will receive a dispatch confirmation email containing your tracking number.

Full details in our delivery policy.

• 14 days to change your mind: you have 14 days from receipt of your parcel to return an item to us, with no need to give a reason.
• Conditions: the item must be new, complete and in its original condition, accompanied by the invoice. Return costs are borne by the customer.
• Refund: it is made to your original payment method, after the item has been received and checked. Allow 7 to 14 days depending on your bank.
• Faulty item: contact us with a photo of the fault and we will offer you an exchange or a refund. All our lights are covered by the two-year legal guarantee of conformity.

For any request, write to us from our contact page. Full details in our returns and refunds policy.